Generally, when we buy sanitary ware in the building materials market, the merchants will provide installation services, which really saves us a lot of things. But now there are many young couples advocating DIY, and they want to personally participate in the home decoration, especially our bathroom decoration. Today, the editor will teach you DIY shower installation. In addition to carefully studying the installation instructions, we must also pay attention to some installation details, especially the pipe size and aperture size during installation. The installation height of the shower is also very important. .
The installation process of the shower:
1. After measuring the size, go through the processes of threading, lead oil, and twine winding on the pipe, put on the elbow, and put the lead oil and twine on the short section of the wire, and then install it on the nozzle.
2. When connecting the shower and the copper water inlet, tighten the nut by hand, level the screw eye on the disc, and draw the mark. Then remove the shower, make a hole with a diameter of 40mm and a depth of 10mm, and roll the lead sheet into the hole to make it solid.
3. Pay attention to lead oil and pads at the copper water inlet to prevent rust and oxidation. Fix the shower disc and the wall with wood screws.
4. When installing the shower, the shower should be hung upright, the disc is close to the wall, the mark is drawn, and a hole with a diameter of 40mm and a depth of 10mm is cut, and the lead sheet is cut into the top, and the nut is filled with pads. Tighten it, and fix the disc on the wall with wood screws after **.
The installation points of the shower:
1. Generally speaking, the shower head and the shower head of the shower are used for supporting installation, the distance from the ground is 70-80 cm, the height of the shower column is 1.1 meters, and the length of the joint between the shower column and the shower column is 10-20 cm. The height of the sprinkler from the ground is 2.1-2.2 meters, and consumers should fully consider the size of the bathroom when buying.
2. Do not install the cold and hot water supply pipes backwards. Under normal circumstances, facing **, the hot water supply pipe is on the left and the cold water supply pipe is on the right. Except for special signs. After the installation is complete, remove the aerators, showers and other easily clogged accessories, let the water flow out, completely remove the impurities, and then reinstall them.
3. The tools attached with ** should be kept for future maintenance. When disassembling the water inlet hose, do not wrap the sealing tape or use a wrench, just tighten it by hand, otherwise the hose will be damaged. Wall-mounted** Determine the exposed length of the elbow according to your needs, otherwise too much of the elbow will be exposed on the wall, which will affect the appearance.
4. General households choose hand-held showers, lift rods, hoses, and wall-mounted showers** combined showers** which are extremely affordable, and can be used with shower rooms or bathtubs. Install the height of the lifting pole, the height of the upper end of the pole is 10 cm higher than the height of the person. The length of the shower hose varies from person to person. If you want to use the shower to wash the floor of the bathroom, you can choose a longer one. In general, 125 cm is sufficient.
Post time: Nov-26-2021