If you want to install a faucet in the kitchen and start it normally, you should also be able to understand the correct installation method, how to install a kitchen faucet? The faucet is switched on and off so many times a day, and it must be very easy to be damaged. Destruction of the faucet cannot play its role. Of course, it must be replaced. How to replace the kitchen faucet?
1. How to install a kitchen faucet
1. General faucet: The kitchen faucet is used very frequently, and the nut must be tightened during installation. When installing a two-hole kitchen faucet, it is recommended to choose a faucet with screws and improve the design of the fixed screw cap, which is more reliable.
2. Installation of temperature-controlled kitchen faucet: When installing a temperature-controlled faucet, please keep in mind the principle of heating on the left and cooling on the right, and do not install the hot and cold water pipes incorrectly, which will cause the faucet to not work properly. It is also worth noting that natural gas and solar water heaters cannot use temperature-controlled faucets, and their pressure is too low. When installing a temperature-controlled faucet, do not forget to install a cold and hot water filter.
3. Single-handle kitchen faucet installation: The single-handle kitchen faucet has installation instructions, check whether the spare parts are complete before installation. General spare parts should be equipped: fixed screws, fixed metal sheets and gaskets; two water inlets. Then take off the faucet and move the handle up and down, it feels soft and casual, with a slightly symmetrical and soft obstruction. Then check that the surface of the electroplating process is bright. There are no bubbles. Spots and scratches are the standard.
2. How to replace the kitchen faucet
1. Look at the surface
The quality of the faucet lies in its gloss. The smoother and brighter the surface, the better the actual effect.
2. Turn the handle
When a good faucet rotates the door handle, there is not too much gap between the faucet and the power switch, which is very easy to turn off and does not deviate; the fake and inferior faucet not only has a large gap, but also has a large sense of frictional resistance.
3. Listen to the sound
A better faucet is made of copper, and the percussion sound is dull; if the sound is too brittle, it may be a stainless steel plate, and the quality is not good.
4. Weigh the net weight
You can’t buy a faucet that is too light. The main reason for being too light is that the manufacturer has hollowed out the copper inside in order to control the cost. The faucet looks very large.
5. Identify the logo
Generally speaking, professional products have the brand logo of the manufacturer, while some informal products or some high-quality products often only have some paper labels or even no logos. Be careful when buying.
How to install a kitchen faucet? The steps to install the faucet look easy. It is actually more difficult to do it step by step. It is recommended that the installation work be handed over to a technical professional master. How to replace the kitchen faucet? If you don’t know how to replace the faucet, don’t replace it blindly, otherwise it will only consume time.
Post time: Aug-04-2022